Melanie Riise
Melanie Riise
~~https://caniuse.com/sharedarraybuffer~~ This was mentioned as a perquisite for threading in browser, not node.
the error log will also be helpful to know what libs were missing
@jansol I came across this issue yesterday, when multiple links are put into the same input it will select whichever seems to be on "top" i think. So trying to...
I personally like the idea of being able to optionally split a node into its outputs, inputs, and monitors for nicer looking graphs. Combined is a sensible default, but the...
> NXP devices can't be probed right now (at least not mine), you need to manually specify the chip type. do you mean with cli args? I was using `Embed.toml`...
if that's the case I don't mind picking up where you left off. I also realized I could probably dig into pyocd to lean how they do it as well...
@Yatekii since you were involved in getting the sequences for the s69, are there some sources I can refer to to make sure the s1 and s2 sequences accounted for?...
Thanks a lot for this @Tiwalun!
I tried using probe-rs with my s69 dev board using the jtag and CMSIS probe firmware provided by nxp with the same result as above. [gist](https://gist.github.com/mriise/9ded2f5c736b8bfdedae051fb5ec502d) I also reviewed the...
I am using the onboard debugger for the LpcXpressoV2 with `LPC432x_IAP_CMSIS_DAP_NB_V5_361` firmware flashed to it using lpcscrypt. the Jlink firmware comes from NXP as well. the device enumerates as `NXP...