mprowe

Accessing via mosquitto_sub/pub. How?

1

With the example program **uMQTTBrokerSampleOOFull.ino** running. Trying to subscribe using **mosquittio_sub -h 192.168.4.1 -t\# -v** from a PC on the 192.168.4/24 net give the following error. **_Connection error: Connection Refused:...

Request for ATmega328PB

1

Hi Carlos, Any chance that you could add the "PB" variant to your library? Regards, Martin

# Problem/Motivation > Can not connect to InfluxDB ## Expected behavior > A positive message when I select "Save & Test" ## Actual behavior > it reports “Invalid URL”. ##...

Compiling my own copy?

7

I see the pre-compiled files and I see the src/RS485-WiFi-EPEver.ino. How can I compile the .ino in the Arduino IDE? I'd like to make one or two tweaks... Regards, M

When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth?

5

Eagle Ver 9.6 PCB_GCODE ver 3.6.3 Repeatable: Yes. Requesting drill only:  First hole is OK, subsequent holes use the "Spot Drill" depth. This is a snippet from drill file....

"Total Power" reporting zero on Eastron SDM230m

7

### The problem I am using the sample code from here: [SDM Meter](https://esphome.io/components/sensor/sdm_meter.html). My modified code is included (in full) below. When run, the displayed value for "Total Power" is...