lionmp

I not use optional external temp sensor, so my problem is not related with power saving feature.

Hi Raomi, I use mqtt on separate server (not addon in Home Assistant), however I analyzed logs from espaltherma and I have not noticed any difference. Logs looks like the...

Hi Raomi Now I have seen the case when INV frequency (rps) freeze.  and logs not show enything unsual 

 `{"Operation Mode":"Heating","Thermostat ON/OFF":"ON","Defrost Operation":"OFF","Outdoor air temp.(R1T)":"-2.6","INV frequency (rps)":31,"I/U operation mode":"Heating","BUH Step1":"OFF","BUH Step2":"OFF","Water pump operation":"ON","Leaving water temp. before BUH (R1T)":29.3,"Leaving water temp. after BUH (R2T)":28.8,"Inlet water temp.(R4T)":22.9,"DHW tank temp. (R5T)":39.3,"Flow...

I will check it however I think that in HP panel it did not hangs but we will see.

During last two days I saw problem with defrost information and Outdoor air temp.(R1T) and both are displayed correctly on HP panel.

Today, I have noticed problem with "Outdoor air temp.(R1T)"   `{ "Operation Mode": "Heating", "Thermostat ON/OFF": "ON", "Defrost Operation": "OFF", "Outdoor air temp.(R1T)": 0.8, "INV frequency (rps)": 24, "I/U...

Hi, I have updated my firmware in Daikin Unit and unfortunately the issue is still exists. Some parmaeters are still freeze in espaltherma. I have also checked that even i...

@raomin Unfrotunately yes. 

> Did you try to use an external power supply like @stomko11? No I did not. You know, everythink else works fine. Problem is always on the same attributes: "Outdoor...