morphias2004

Display 'SLIDE' setting typo

1

Hi, First of all, thaks for this awesome bit of kit! 🥇 👍 I just noticed that the 'slide' direction can be modified in printermonitor **// You can change the...

Astral location syntax

1

Hi, Can you please explain the **87** in this line? I think I have worked out the rest.  Thanks in advance! Ben.

[BUG] XL does not turn off hot end after load or unload

13

**Printer type** - XL 5 tool head **Printer firmware version** - 5.1.0 production **Original or Custom firmware** - Original **Describe the bug** Unloading filament from 1 or multiple tool heads...

Please add the option for 'Rectiliner Interlaced' to the setting for Interface Layers. This results in smoother top layers for the interface materials as a result of the layers printing...

Setting extruder temp sets temp wrong extruder for Prusa XL

2

**Describe the bug** When you set the extruder temp via the main screen on OctoDash, it sets the temp on Tool 1 (Tool 0) instead of the currently loaded tool....

**Describe the bug** GCode in customs actions are not always processed in order. **To Reproduce** 1. Create a custom action with multiple GCode commands 2. Save the custom action 3....

M2 drive missing after update to 7.2.2-72806 Update 2

25

I have an 918+. This happens every update, but this time I can't get it back. Normally, a combination of running a restore with **Synology_HDD_db** and **Synology_enable_M2_volume** and then letting...

Update to 2.4.1 causes syslog and kern.log to fill drive

9

**Describe the bug** Updated to v2.4.1 and updated the custom-styles.css for the Nox these to the new version and rebooted. Within 10mins, the hard drive had been completely filled till...