Jens Nixdorf comments

Repositories
Issues
Comments

Results 6 comments of


                                            Jens Nixdorf

Unable to use pin 20 as SCL for I2C on ESP32.

I also get an "OSError: [Errno 116] ETIMEDOUT" with a "feather esp32 V2" and MicroPython v1.19.1 Using pin 14 walks but is not the solution since I want to use...

Thermal sensor changing every boot

I have the same problem running on 5.9.3-1-MANJARO

3rd party debian/ubuntu repo not up to date?

Worked for "jammy" as well.

ctop for debian bookworm not present in repository

Try this workaround: #347

Minimum bit width trigerring a "bit width too big (maximum 14)" error with ESP32-C3

The problem was also present to me when I add (attach) a **third** servo to be controlled by an Unexpected Maker FeatherS3 (ESP32-S3). I therefore switched to the 'ESP32 ESP32S2...

Frequent errors in .loop calls with CircuitPython 8

I experiencing the same with a Feather **ESP32-S3** TFT and CircuitPython 8.0.0-beta.2.