moodyblue
moodyblue
Hi, I've bought a "Mi Smart Sensor Set" in a promo sometime ago. My plan was to use the sensors and trash the gateway, but then I saw this thread....
In Mi Home app IP and token did not change. I have put the IP and token in OpenHAB (Xiaomi Mi IO binding) and it goes to online. In theory...
Don't know why, but `miiocli device --ip 192.168.131.16 --token xxx info` works again. So I've enabled a web server to put file `lummod_gw.bin` and gave the `miIO.ota` command. Waited 30mins...
I need some time to investigate how to enable logging. I'm using a QNAP NAS with apache web server. apache log only contains boot messages. I'll try again in a...
I've enabled apache log. It shows download requests from my PC but not from the Mi Gateway. From my PC I can download using url `http://192.168.130.210:81/lummod_gw.bin` I'm not a linux...
I've tried, but the same symptom: I have no log that gateway has attempted to download the firmware, but in order to continue to be able to send `miiocli` commands...
I've tried several `miiocli` commands. info and some others are ok, but everything I try to run with raw_command produces a timeout and puts the gateway unavailable for a couple...
+1 This is also usefull to ping devices on different LAN's
I have the 2 minute delay in the following bindings: - daikin - SmartHome J/HTTP - miio (mentioned above) OH 4.0.0.M3
> I am also using the networkupstools binding and did not notice delay at initialization Me too, no delay in that binding