Mobilinkd LLC

https://github.com/walac/pyusb/commit/dac78933f6a6eaf5ae82f48e2f4e7d1733dc2f98#diff-23d5219b9f9598e15347eacae1ec161e changed the interface to this call in 2013.

I am working on new TNC prototypes right now so, what the heck, I might at well do a version that has a dual-mode BT module on it. I'm not...

Surprisingly, EDR uses somewhat less power than BLE when connected. I can tune the parameters to make BLE consume slightly less, but then it becomes painfully sluggish in the config...

Hi Mark, when you say "generic UART over BLE", is there a new standard service UUID for this? When I last looked, every BLE vendor was doing their own implementation...

Hi @markqvist , Every module manufacturer uses a different service UUID for transparent data transfer. We have a product on the market using those UUIDs, and @hessu supports those UUIDs...

Hessu, if you have time to do it, please do. I will certainly review and can provide additional details where required. I think it's important that we leave BLE-specific implementation...

It looks like someone else is a fan of RFC 2119. :-) One change I believe needs to be made is with regards to the vendor extensions section. One cannot...

I agree with Mark.  KISS is agnostic as to the contents of the payload.  I have used the TNC3 to receive satellite telemetry data which are not in AX.25 format,...

If the module does not allow you to fully specify the service and characteristic UUIDs to match those in the spec, it will not work. IIRC, the HM-10 is fairly...

I'd like to suggest a potential half-way step to specifying generic components. Allow users to specify alternate part numbers in the manf# field, with parts separate by a pipe symbol...