mmarich

I'd like to add my +1 for this feature request. I am developing a USB control solution for an automotive domain, and having the ability to wake the camera without...

Just an additional though, the optimal use case for my application would be to update the wake setting via HTTP over USB, however I can also see HTTP over WiFi...

I can confirm that the camera is indeed in video mode, and I am loading the video preset group prior to attempting to alter video resolution and frame rate. I...

I've installed an appropriate A2 SD card, and added the additional call to ensure that the video preset group is loaded, and still encounter the same issue: user@device ~ %...

I can confirm that the second camera exhibits the exact same behaviour: user@device ~ % curl -v -XGET --url 'http://172.29.146.51:8080/gopro/camera/control/wired_usb?p=1' * Trying 172.29.146.51:8080... * Connected to 172.29.146.51 (172.29.146.51) port 8080...

@pb3975 thanks for the tip. It looks like setting #175 should be set to 1 (Pro) on Hero 11 and newer cameras. I'll give it a try and report back.

I can confirm that setting the controls to pro using the HTTP interface does allow the resolution and frame rate settings to be updated. @tcamise-gpsw I would ask that the...

Try placing your phone into airplane mode and disabling WiFi. In my experience so far, that will cause the device to start the USB NCM network interface. I have only...