MikeNomatter

Hide accel related modes if accel disabled

1

Firmware part of configurator issue: https://github.com/betaflight/betaflight-configurator/issues/2597

hide accel related items when accel disabled

6

partially resolves #2597

Hide accelerometer dependent items when accel is disabled

4

Following items probably shall be hided when accelerometer is disabled: - FPV camera angle on configuration tab - Acro trainer angle limit on PIDs tab - FPV angle mix and...

disable autoscroll in firmware flasher tab

3

There is annoing autoscroll to the "Release info" on this tab. On first entering this tab it will autoscroll, then one need to scroll up to select firmware: - check...

Can't set "Pit mode frequency" via VTX Table tab

2

"Pit mode frequency" could be changed only via cli. After changing it on VTX Table tab it is resetted in 0 on Save button press

Add ability to download logs from FC

2

### Is your feature request related to a problem? Please describe You always need to open BF Configurator first ### Describe the solution you'd like Port from BF Configurator "activate...

Шаги по воспроизведению: 1. настраиваем клиент и сервер в соответствии с инструкцией 2. переходим в ветку ws2020 3. запускаем клевер и server.py, дожидаемся отображения клевера на сервере 4. запускаем на...

Make Issue template axpandable

6

### Is your feature request related to a problem? Please describe issues are hard to read ### Describe the solution you'd like hide at least diff section of issue template...

Return linux builds

33

there are linux pidtoolbox users, please don't ignore us

notify you when long operations are completed

5

### Is your feature request related to a problem? Please describe There are a number of operations that take a long time: -clearing the flash memory -downloading the log -flashing...