Jordan Cook
Jordan Cook
I must have an older verion of your repo, because the worker is listed before the db and I had this issue. Creating the db service before the worker fixed...
Are dimensions of component locations available for the board? This would be helpful but not required as I can take measurements of my unit (DIY) if needed.
Thanks for all of the info @beadon, this is very helpful. I have an existing case in mind that I just used for a pi with a poe+ hat. Using...
Where can I find the gerber files? For someone reason I thought I saw them when I looked some weeks ago ago but now there isn't much in the repo....
> The gerber for the DIY PCB is in the Wiki, on this page: https://github.com/David00/rpi-power-monitor/wiki/Schematic > > The gerber for the factory assembled board is not publicly available at this...
So its not ready for prime time, but I thought I would post an update. I have a first case prototype which is actually pretty good for MKI but defintely...
So I thought I would post a quick update as I’ve been through a few more prototypes and I think I am pretty close to having a design worth sharing....
Sounds good to me. I'll work on it. In the meantime, I've attached a zip file here with STLs of the most current design for printing. [PiPower 4 V25.zip](https://github.com/David00/rpi-power-monitor/files/13049233/PiPower.4.V25.zip) The...
I am using version 1.2.9 and esp32 3.1.0 and also getting the issue.
> > And the app in Heimdall requires an API Key =( > > I just got it working myself. The same docs you reference show that Heimdall needs to...