missing233

Cannot load older maps

4

CSO2 has updated its engine. When I load an old map(UC_MUSEUM.bsp eg.) game crashed. Console: Host_Error: Mod_LoadCubemapSamples: funny lump size in maps/UC_MUSEUM.bsp Crash message dialog: MapEntity_ParseAllEntities: found LZMAG when expecting...

[建议]加入MitM/URL Rewrite相关功能

4

解决广告拦截被Surge/Quantumult X卡脖子的问题 比GFW更遥遥领先一步，内网设备不安装证书不允许接入互联网（逃

[Feature] 增加绕过非中国大陆IP功能

4

### Verify Steps - [X] Tracker 我已经在 [Issue Tracker](……/) 中找过我要提出的问题 - [X] Latest 我已经**使用最新 Dev 版本**查看过，并不包含该功能特性或者还不完善 - [X] Relevant 我知道 OpenClash 与 内核(Core)、控制面板(Dashboard)、在线订阅转换(Subconverter)等项目之间**无直接关系**，仅相互调用 - [X] Definite 这确实是 OpenClash 应包含的特性 -...

**问题描述** 场景复现： OpenWrt 主路由设置端口转发局域网 192.168.1.3(NAS)的 443 端口映射到外网 8443 ，默认开启了 NAT 环回 主路由 LAN 口接 TP-Link ST-5008F三层交换机（初始化后使用默认配置作为傻瓜交换机使用）， PC 和 NAS 均连接到交换机上， PC 能 ping 通 WAN 口 IP ，尝试使用 WAN 口...

未知原因导致PVE DSM关机或重启均无法关闭/重启虚拟机

9

请填写以下信息. Please fill in the following information. Install ENV: (You can find it in the boot interface.) * DMI: PROXMOX 7.4-3 * CPU: Intel Xeon D-1581 * NIC: VirtIO *...

Just like this issue: https://github.com/radcli/radcli/issues/96 According to RFC2865 (https://datatracker.ietf.org/doc/html/rfc2865#section-5.26), "Multiple subattributes MAY be encoded within a single Vendor-Specific attribute" It seems that radcli does not include this function. 

DHCPv6 PD lifetime on Japan NTT 10G Hikari

2

I'm using OpenWRT with NTT 10G Hikari (Flets Cross). I've encountered a specific issue regarding the DHCPv6 PD. From the NTT DHCPv6 server, my DHCPv6 Client has been assigned a...

[Bug] 绕过中国大陆IP功能对一些网站无效

29

### Verify Steps - [X] Tracker 我已经在 [Issue Tracker](……/) 中找过我要提出的问题 - [X] Branch 我知道 OpenClash 的 Dev 分支切换开关位于插件设置-版本更新中，或者我会手动下载并安装 Dev 分支的 OpenClash - [X] Latest 我已经**使用最新 Dev 版本**测试过，问题依旧存在 - [X] Relevant...

MAP-E tunnel not working with VSOL V2802RH or HSGQ-Z110 on Japan NURO Hikari 2Gbps plan

2

I'm having some trouble with my NURO Hikari 2Gbps connection which uses an IPv4 over IPv6 tunnel based on MAP-E protocol. When I'm using VSOL V2802RH or HSGQ-Z110(I've already set...

map: Add SNAT fix option for specific ISP and displaying portsets in luci

10

1. Ensure that the multiple port ranges used with specific ISP MAP-E implementation are actually SNAT-ed correctly. from: https://github.com/fakemanhk/openwrt-jp-ipoe 2.add support for displaying portsets in luci.  Dependent PR: https://github.com/openwrt/luci/pull/7301