Anthony Bordel
Anthony Bordel
What was the solution?
Thanks, someone may find it useful. :) Strange thought that you couldn't flash straight the v.2.7.51
About the experimental library, is already open sourced? Maybe I can contribute on it too. ;]
AFAIK ting was working with 2G as well. Did you try to activate the simcard and then swap into whidelite? Asking because I learned to never trust support people. Sometimes...
You may also check https://1nce.com/en/pricing/ 2G coverage. Their plan is quite nice!
Hi, can you provide the instructions to flash the eeprom with the correct 8CH VID-PID to use it with Pulseview? Xie Xie!
As I understood if A0 is high (3V3) the I2C setting will be 0xC2. Which means it loads the VID-PID from RAM.  **It means by default your LA does...
Thanks! 🫡  Which one I shall use to flash the eeprom to use the FX2LP with pulseview? And especially what would be the VID:PID and the correct command arguments...
I would extremely grateful if you add to the README the two commands to flash the EEPROM on NanoDLA: 1) To dump the original EEPROM of the NanoDLA (as backup)...
Any suggestion is very appreciated. I would like to experiment with different FWs... but I prefer to be sure of the right commands and arguments.... before bricking the NanoDLA 😅