mikrocoder
mikrocoder
Hello, your current avrdude.conf is broken. The previous one without ATmega-DA support works with my ATmega4808. For example. avrdude -c jtag2updi -P com9 -p m4808 -v avrdude: error at C:\avrToolchain\avrdude\avrdude.conf:1115:...
Hello, first of all, thanks for maintaining the code. However, it is difficult to keep track of the flow of the actual code. :-) So I have to ask where...
Hello, does your "programmer" do a real reading check after writing? "Verify Flash after Programming. Or does he just write without any check?
Hello, I don't know what else I have to set. With the .ini I get 4 usart error messages. I do not know where the takes the 4 USARTs. The...
Hi, basically I realize that an ATmega4809 and relatives cannot measure their own Ub. What, for example, an ATmega328P can do. Measure its own UB backwards via bandgap. [Measuring Vcc](https://provideyourown.com/2012/secret-arduino-voltmeter-measure-battery-voltage/)...
Hello, I would like to ask something for someone. It is about an ARDUINO UNO WiFi REV2. When he wants to flash a program with your MegaCoreX package it does...
Hello, Initial situation: Configuration with your MegaCoreX package, original Arduino Nano Every board, setting ATmega4809 with Every Pinout etc. The timer TCA0 I have reprogrammed for own purposes, therefore for...
Hallo, I'm dealing with TWI right now. I noticed that your naming scheme is not 100% the same. The TWI buffer length '_BUFFER_LENGTH_' should have the name TWI_BUFFER_LENGTH. Otherwise it...
Hello, there is an error in the USART define links. A bit definition called **U3Xn** does not exist. This is surely a typo and must be **U2Xn**. n stands for...
Hi, would your lib work with this display as well? [elecrow esp32-display-7](https://www.elecrow.com/esp32-display-7-inch-hmi-display-rgb-tft-lcd-touch-screen-support-lvgl.html) This seems to have an exotic Driver IC EK9716BD3 and EK73002ACGB? Or are they compatible with another?