Mike

@Frunner20 just found back my sensor in my box because i had have 4 hart attacks and will work now on a human sensor array. The board will be the...

@muelli01 Hi, -> after locking into the source and the 3 higher value could it be in the source at line 123...124 (comment)? -> could it be that the number...

@fotosettore normally it would be the: _LOLIN(WEMOS) D1 mini Pro_ I think you mean this one? Link: https://wiki.wemos.cc/products:d1:d1_mini_pro

@Yu-b Hi, about your sd-card issue. - you know that the shield supports FAT16 or FAT32 formatted only? - have you one of these high speed cards? It can be...

@girish0002 a humming sound points to a defect in the supply controller chip or better the coil which is used. Replace the board with an original. When you are using...

@rlaferla or look here. An example from april 2017: https://www.hackster.io/innovativetom/control-stuff-from-the-internet-create-a-wifi-switch-3c0ca8

@myk3y I have added your AutoClock to my Wemos Library. So as some other examples to have a full featured funcionality. Thak You for your input. @wemos BTW: You make...

@TLPT badly enough you will never get an answer. Possible i can help out because i have my own fork of it and adding and correcting all things i find...

@LeeTwelve @ddavidov You are using the D1 Mini or the D1? On D1 MIni it is: 7 configurable IO (Default: D1) Link: https://wiki.wemos.cc/products:d1_mini_shields:relay_shield 

@cweinhofer only thing is: replace the board -> I have a D1 mini Pro that I purchased a few months ago you have really an original one or a very...