Yi Zhai
Yi Zhai
Every time I generate a new heatmap, it just cover the previous one and they become one heatmap, which contains two kinds of data from two choice. I know this...
I added support for Xiaomi Mesh Neutral Wire version wall switch and LS Smart Curtain Motor. And as is mention in https://github.com/AlexxIT/XiaomiGateway3/commit/fb0c0300f7a870ace672b22e92d63726d584c760 , set the parameter to 2 may be...
I have some Xiaomi's newest mesh wireless buttons [XMWXKG01YL](https://home.miot-spec.com/spec?type=urn:miot-spec-v2:device:remote-control:0000A021:yeelink-contrl:1), and I tried to write converter in devices.py, but I found that the bluetooth spec is different to the former zigbee...
### What happened? Hi, I have three yeelight dimmer which are two YLKG07YLs and one YLKG08YL. The problem is that I can configure the YLKG07YLs and they work, but after...
最新版本的Midea ac lan可以接入热水器了，立马下载安装了一下，发现了几个问题： 热水器调温后可以同步至ha，但是ha调温后无法同步至热水器，几秒钟后恢复为热水器之前的温度。 热水器型号为燃气热水器JSQ30-16HC4，可能是set_temperature方法的实现有些问题； ~~然后是Homekit接入的问题，由于本集成的模式选择为 "Shower Mode", "Kitchen Mode", "Bathtub Mode", "Temperature Mode", "Cloud Mode", "Energy Saving"，并不能严格对应HA默认的模式（参考 https://developers.home-assistant.io/docs/core/entity/water-heater/ ），导致在Homekit中无法选择相应模式，这其实不影响什么，因为模式调节其实也无所谓。但是一个关键问题在于没有提供"STATE_OFF"模式，导致Homekit中会一直显示正在加热，不能显示关闭的状态~~ 刚试了试，HA官方接入就没把这个弄明白，不管什么模式都会显示加热，没法关闭😂
举个例子，当前模式下，客厅温度的数据为#30，客厅湿度的数据为##30 对于小爱音箱，你问他客厅温度，他会回答你 客厅温度温度 是30度，但是问湿度就是0%了，要想问湿度，就得问他，客厅湿度湿度是多少。 所以，能否将温湿度两个传感器结合起来，数据直接设置为#30#30呢
Help solve issue https://github.com/AlexxIT/XiaomiGateway3/issues/816 and https://github.com/AlexxIT/XiaomiGateway3/issues/809 Users need to upgrade the firmware of Linptech motion sensor which makes the product name become Linptech motion sensor 2 (not motion sensor with...
detail: https://home.miot-spec.com/spec/linp.motion.h1 This sensor does not appear in HA at all. And the log is here: > 2022-08-26 19:21:10,683 192.168.0.103 [BASE] a4c13866ddb7 (6284) setup ble (6284): 2022-08-26 19:21:20,403 192.168.0.126 [MQTT]...
yeelink.bhf_light.v10浴霸中有一个干燥功能，只有在`ptc_bath_heater.mode=1`时才可以启动 为了方便在ha中开关这一功能，我把`ptc_bath_heater.mode`放到了自定义实体中`switch_properties`里。 但是始终无法通过这一个开关打开干燥功能，我检查了一下，发现在`ptc_bath_heater`实体中开启干燥功能，是将`ptc_bath_heater.mode`设为`1`，而`switch_properties`则是设置为`true`，因此导致了问题的发生，后面我也用`Xiaomi Miot Auto: Set miot property`服务试了一下，确实如此。 所以，请问有没有办法指定自定义实体中开关实体的可选值呢？
 It seems that the way to update firmware using telink flasher has been forbidden.