michael-west
michael-west
@chandersVT The fact that a smaller send_frame_size succeeds seems to suggest that bulk transfers may not be working properly. Using a maximum frame size of 512 for USB2 or 1024...
Redirecting this to Support for reproduction and validation.
@cjosephson Thank you for reporting this and providing the detail. We have opened an internal issue for further investigation.
@drmpeg Thanks for the solution! @dslotter Thanks for reporting! We welcome pull requests for the manual `host/docs` or you can submit an Application Note to [email protected] for our Knowledge Base...
Yes, you can use the same port simultaneously for TX and RX. The RF switch for the TX/RX port will be switched to the TX path and the signal on...
Redirecting to Support for reproduction and validation.
This is the same error you get when you unplug the USB cable when the device is running, so it appears that something is causing the device to drop off...
Good information. Thanks! Since there is a change from 3.8.5 to 3.9.0, it does look like a regression. I will look into it further.
@jblackaby Thanks for the follow up. That is good information. That approach will cause all libusb transfers to complete so none have to be canceled. The sleep time is a...
Did the Digilent drivers install successfully (see https://kb.ettus.com/X300/X310_Device_Recovery#Installing_the_Digilent_Cable_Driver)? Redirecting to Support for assistance.