Mian Qi

No, so I went to change them. My wiring was here: https://forum.arduino.cc/t/starting-can-failed/944127/4 ________________________________ 发件人: qubolino ***@***.***> 发送时间: 2022年1月9日 9:31 收件人: sandeepmistry/arduino-CAN ***@***.***> 抄送: Mian Qi ***@***.***>; Author ***@***.***> 主题: Re:...

> does it start without changing spi and clock freq? No.

I found if you select "ACAN" in Arduino IDE "Library Manager", you could meet others CAN libraries, I havn't try them, maybe there is any could run. ________________________________ 发件人: jackievlobos1...

And, when I used it, it shown negative value sometimes, like "-277 cm", what did it mean ?

Sometimes, it showed negative value, expecialy when I put a barrier nearer than 3cm, is it normal? ________________________________ 发件人: Erick Sim?es 发送时间: 2020年8月20日 20:14 收件人: ErickSimoes/Ultrasonic 抄送: Mian Qi ;...

I just test this file in my chip, it was OK, my chip is: https://ibb.co/YLKxcKR

Before I changed the pin, it prompted: 16:49:21.412 -> Accelerometer Test 16:49:21.459 -> 16:49:21.459 -> Ooops, no ADXL345 detected ... Check your wiring! After changed it, it prompted as the...

________________________________ 发件人: Wolfgang (Wolle) Ewald ***@***.***> 发送时间: 2023年11月22日 13:09 收件人: wollewald/ADXL345_WE ***@***.***> 抄送: Mian Qi ***@***.***>; Mention ***@***.***> 主题: Re: [wollewald/ADXL345_WE] example for SPI doesn't work. (Issue #12) Of course...

The label: 345B #021 7554 PHIL The circuit: ADXL345 module Arduino UNO 5v                            5v Gnd                          Gnd CS                           D10 SCL                          D13 SDA                          D11 SDO                         D12 ________________________________ 发件人: Wolfgang (Wolle) Ewald ***@***.***>...

I didn't know github now synchronozes between it and MS mailbox before, sorry, I deleted the copied comment. ________________________________ 发件人: Wolfgang (Wolle) Ewald ***@***.***> 发送时间: 2023年11月25日 9:59 收件人: wollewald/ADXL345_WE ***@***.***>...