Marc

Hi, reviving the thread. Tried the `echo 0 > /sys/bus/pci/devices/0000\:01\:00.0/d3cold_allowed` line and resume works (around 10s to wake up) however there is no sound after wakeup. Am I missing anything?

Seems the issue is not solved in the end.. Connected devices (to thunderbolt display) aren't recognized again. And neither the udev rule nor the bolt tool nor the kernel param...

I did reset the SMC and updated mac OS the other day when I had the issue for the second time, but did not seem to solve it. I later...

Yes, it works, booting macOS shows all devices connected to thunderbolt display (as well as the eponym display of course). But booting Linux right after doesn't 'wake up' the devices,...

Tried SMC and NVRAM reset, no luck. When booting OSX, everything works as it should. In linux, boltctl info [uuid] shows `Apple, Inc. Thunderbolt Display` ` ├─ type: peripheral` `...

Still trying to sort this out. With another laptop (macbook air linux 4.15) connected to same thunderbolt display lsusb shows : `Bus 003 Device 007: ID 05ac:9227 Apple, Inc. Thunderbolt...

back at it, trying to boot USB drive with linux install and I have same issue. Holding option key on boot shows USB key, start booting and then stop (after...

No, sorry if it was not clear To clarify : 14,1 linux -> usbc/tb3 port -> any usb device or usb hub : works 14,1 linux -> usbc/tb3 port ->...

tried booting ubuntu 18.04, same issue. is it possible that macbook firmware has been altered?

Yes, plugging a usb c (non thunderbolt) dock works. Yes it is an apple tb display. Plugging the tb3 to tb2 adapter to apple thunderbolt display have only the display...