Moitreya Chatterjee
Moitreya Chatterjee
This is perhaps happening because the corner detector was not able to track the keypoints (corners) in the new image. Hence, p1 came out to be None. You should handle...
Hi @chengzhag, Really appreciate your response. So it did install the graphics libraries after having asked for sudo privileges. So not sure what went wrong. I did not get any...
A quick follow up, was your system setup on Ubuntu 16 or 18?
Hi @chengzhag, Really appreciate your response. So I have been trying to run on Ubuntu 16, so wonder if that's causing some incompatibility. But anyways, after installing your suggested packages...
Hi @chengzhag , Really appreciate all your help/inputs! I was able to build and run the demo. To summarize, following were the changes I ended having to make: 1. Install...
Hi @chengzhag , Apologies for re-opening the issue. So while pre-processing the Pix3D dataset, it seems that the mesh_fusion/fusion.py code is not really using the GPU, eventhough I compiled the...
Hi @chengzhag , Appreciate your inputs. But it seems that the Pix3D pre-processing step is not as fast, at my end. I've tried it independently on two different systems but...
Hi @chengzhag , So I don't know why but the check with the __main__ in fusion.py/scale.py/etc. was returning false. Hence, I had to turn of the subprocess call and instead...
Yes, line 14 and also line 435. Yes the GPU issue got sorted too.
Appreciate the response.