Michael De Caria
Michael De Caria
👍 We have recently run into another use case for this. There is a wide variation of which roles a DCC application with OCIO implementation will use for which purpose....
No sorry, only Phison 2251-03 will work with the current code.
I would try three things, either put your usb in bootmode manually by shorting circuiting the pins then trying again or.. Changing the burner to the one I used in...
Yep same here, get to last step and then run into this Header not accepted error... I have FW version: 5.00.53 and its also a Verbatim Store N Go V3
HA I got it working after many hours of testing and banging my head against the wall. I used MPALL 3.72.0B with the following files: Burner BN03V114M.BIN Firmware FW03FF01V10810M.BIN I...
Hey @benji1000 Looking at the attached image, did you put the usb in bootmode before using MPALL? Did you have a look at that guide I linked? You might get...
You should be shorting pins 2-3 Not the 1-2 pins. View https://github.com/brandonlw/Psychson/wiki/Executing-From-Boot-ROM
Setting boot mode through DriveCom won't work, the only way is by shorting those pins while plugging it in. Keep trying and then run `DriveCom.exe /drive=[driveLetter] /action=GetInfo` It needs to...
Read my steps again, did you run SendExecutable command before running the SendFirmware one? Also if you're using different burners/firmware then what specified, I'm not sure if it will work.
Phison PS2307 won't work and never will with the current code. The best bet would be purchase a Verbatim STORE N GO V3 USB 3.0 8GB Drive (maybe the 32GB...