Martin Stoufer
Martin Stoufer
New issue with similar issue/fix at https://github.com/prusa3d/PrusaControl/issues/99
As attached, I think you'll find that the .eps, .key, and .css files are tripping it up. I'm also shipping out .png, .nib, and .cdm files as well in the...
[Falcon_support_V1_0.4n_0.2mm_PLA_MK4IS_4h31m.gcode.zip](https://github.com/prusa3d/Prusa-Firmware-Buddy/files/13432088/Falcon_support_V1_0.4n_0.2mm_PLA_MK4IS_4h31m.gcode.zip)
One other odd issue: When I scan to see if the Octopi host is discoverable, it immediately finds this. However, this IP is the for the WiFi on the raspberry...
Some Console logs when the OctoPrint host is "tested": ``` default 17:40:16.535793-0700 mDNSResponder [R7543] DNSServiceQueryRecord(1D000, 0, , Addr) START PID[9889](PrusaSlicer) default 17:40:16.536300-0700 mDNSResponder [R7544] DNSServiceQueryRecord(1D000, 0, , AAAA) START PID[9889](PrusaSlicer)...
Here is my SAN section: Keep in mind that is appears to be a regression. In previous versions the config and cert were rock solid.
This appears to be fixed for us. There was a fix posted on your side that addressed the circular ref in the AST. In fact, even with a project with...