Mark Boudreau
Mark Boudreau
Yes, I did experience something very similar with your tree. Only change I made was to patch with [this](https://lkml.org/lkml/2020/4/1/1206) to get the build to succeed
I suppose it could be the case that there's differing display hardware, though I've not noticed any indication of such in the older 3.4 kernel board code. I am able...
Something else I've noticed is that on reboots, the artifact "halo" persists for a few seconds then slowly fades away. I'd expect that the framebuffer region is wiped on reboots...
Not too sure if this would have anything to do with it... Which toolchain are you using? I'm on Fedora 32, so I've tried the arm-none-eabi compiler packaged there (gcc...
Gave the latest stable debian a shot (seems to be what you're using based off your defconfig header) with no luck, so that rules my previous post out. Is yours...
Hey! Thanks for taking up the torch on this. Been a long while since I've done any digging on the touchpad. There was a point I was able to get...
This is the .config I used: https://gist.github.com/mboudr35/dc973ade2746b5589ab19869d2b31ca8 There is some UART stuff in there. Don't recall if that was all I needed to get output
Unfortunately I was never able to procure anything more detailed in the way of documentation
> [...] lets make sure the name better differentiates it from the existing _gnome_ extension (e.g. _gnomeless-graphics_?). `basic-graphics`, `primitive-graphics`, `mesa-graphics`, `mesa` Perhaps one of these could be a better fit?
@Saviq @tonyespy I've pushed some changes following previous discussion, please give a look when able!