Matt Smith

I have moved on from this board, but did find that I needed to solder a jumper to enable the ESP in my case. Might be the same and you...

Looks like a carelink issue for sure, but not sure what the heck is going on. Screenshot from the follower app:  Screenshot from the pump app:  So carelink...

Weird - works for me. [Another try, direct.](https://i.imgur.com/HYbance.gifv)

Oh man. If I'm dealing with USB cable issues I'm gonna lose my mind. On Sun, Apr 7, 2019, 8:55 PM marcone wrote: > I normally use the Pi with...

I'm still not having any luck even with two cords.. totally happy of plugged into my PC but not the car On Wed, Apr 24, 2019, 8:43 PM Chris wrote:...

Yeah.. I'm not alone but some people have it working. Going to try another raspi and SD to rule out hardware. On Wed, Apr 24, 2019, 9:12 PM marcone wrote:...

Yep, and tried half a dozen other cables in the car. On Wed, Apr 24, 2019, 9:29 PM marcone wrote: > I'd suspect cables more than the Pi or sd...

Using the bare Raspi Zero W there are two USB ports. the first one ("USB") goes to the USB port in the car, the second port on the board ("PWR...

@jasoncross can you confirm which port on the pi you're using? I just got bumped to 2019.12.1.2 and its still happy. On Sat, May 4, 2019, 7:30 AM jasoncross wrote:...

Try with two USB cables just to confirm the car is happy with it otherwise. I wish we had some level of debug or log viewer on the car.. this...