mattnukem
mattnukem
Rolled back to 1.42 and the issue is present there as well. I have permanently mitigated this issue by switching away from Tailscale funnels, which I was using to get...
I think this may be related to #6999. Disabling subnet routing appears to bring the speed back up. This doesn't appear to be limited to SMB, as I've also seen...
Did you set 'profileName = "micro";' to 'profileName = "custom"; in the rackFrame.scad file? If you don't change this, the entry.scad file will not grab the correct dimensions for your...
I've got a set of four Minisforum MS-01's in a customized build printed entirely in PLA. The metal cases get a little warm, but not heat bed warm, so I'm...
Ah, that does seem to have been the issue. Everything led me to believe that was supposed to be the application port, not the proxy port. That could use some...
@kfigiela That sounds like it's worth putting in a separate issue and not conflating with the problem I had. For my issue, I'd just like to see some better clarity...
> I'm seeing this same issue, so I must be misunderstanding in the same way. Help me understand also. If my app is available on port 8010 what do I...