matrixes

I'm certainly experiencing the same issues with the same equipment and components (most importantly the ESP32) described in this project. I have observed the diode detection and the ESP32 repeater...

I currently use the default values of https://github.com/klaasnicolaas/home-assistant-glow/blob/main/home_assistant_glow.yaml except for some obvious things like AP and password settings. The contents of the yaml has `internal_filter` commented out, which mine also...

Is there anything specific I should test out first of the yaml @smulle48 links to? I'm too unfamiliar with the filtering and I'd rather take an approach of changing one...

I don't have any issues with spiking readings. My max power consumption reaches somewhere up to 4000-5000W, but those are very rare. I take it the EDGE filter seem like...

The power draw I have during these tests are around one pulse each second. Switching off the web server made no difference. The repeater skips pulses when comparing to the...

> You can try to change the pulse_pin to GPIO26. > > When I used GPIO12 I also got skipped and sometimes too many blinks. > > The ESP32 got...

So far, none of the changes seem to make a difference. The modifications to `throttle_average` and `filter_out` seem to have made things less responsive if anything, but that could just...

I'm thinking, is this now (maybe it always was) a question for the ESPHome project rather than the Home Assistant Glow one? I mean, if the issue with reporting/repeating isn't...

I would really appreciate the "use larger click area..." task, as right now I slightly too often accidentally tap outside the edges of the contact picture/icon.

> This is my issue as well, and since I spam the participants of the event as a result, I can't use the calendar integration for the time being.