mathison
mathison
Ive used rtl-tcp for a long time in the command. I dont like tending the rtl-tcp in command-line on each RPI I run it on. I recently set dump 1090...
Pre Biulds for windows? were did they go, i would like to avoid setting up the build environment to get this going. do you still have a link?
Im lost the server will not pass this line: ``` config.devices.add(u'audio',name='RSHFiq', AudioDevice(rx_device='Built-in Input',sample_rate=48000,channel_mapping='IQ')) ``` or ``` config.devices.add(u'audio',name='RSHFiq', AudioDevice(rx_device='plughw:0,0',sample_rate=48000,channel_mapping='IQ')) ``` or ``` addCallback(lambda rig: config.devices.add('RSHFiq',rig, shinysdr.devices.AudioDevice('Built-in Input', sample_rate=48000, channel_mapping=IQ'))) ``` ----------------------------------------------------...
The current install instructions dont cover the program being uninstalled or upgraded. I brakes the system wide install. I suggest the following before for 4a. ----------------------------- system-wide installation cd shinysdr...
Warning: XtRemoveGrab asked to remove a widget not on the list /usr/bin/gm convert: Improper image header (/root/.xastir/tmp/snapshot.xpm). System call return error: convert: /root/.xastir/tmp/snapshot.xpm -> /root/.xastir/tmp/snapshot.png /usr/bin/gm convert: Improper image header...
Im looking to track the signal strength on the Client WIFI connection. My node is set to be a Wifi client for it WAN, and once I turn off RF...
**_Notes for the Main Status page._** -add WAN MAC Address on the status page. -add LAN MAC Address on the status page. -add VLAN id assigned too the LAN on...
The default tagged port config for the hap-ac2 is exactly the same as the original hAP. Only no POE passthru! Im requesting that port 1 (POE in) be treated as...
Wifi client SNR missing in the radio section of new UI. The old ui displayed SNR info along side the SSID, the new ui doesn't display this in the new...