martinarva

Shelly: aioshelly (Concurrent call to receive() is not allowed")

31

### The problem Shelly integration has crached my HA since yesterday. I guess it's related to 2023.12 update which happened also yesterday. Happened once yesterday and now this morning again....

First of all, great job! Thanks! **Is your feature request related to a problem? Please describe.** This card is lacking currently playing information. For that reason i have to use...

P_Batt forecast value calculation issue

3

**Describe the bug** P_Batt forecast value calculation uses eta_disch as a multiplier and this causes issue where p_batt is lower than it should be. For example at the moment max...

Thermal model 24h limitation

2

**Describe the bug** Thermal model has a 24h limitation. I have nordpool prices and my MPC uses dynamic prediction horizon up to 34h when there is data. **To Reproduce** Steps...

I have Pace P16S200A and had the "Reserve (Bit 16)". Figured out that this means battery Full has reached. Either the Full-Charge Current is lower than set (mine

Thermal Model: Optimization seems to not pick up the most cost effective hour

3

**Describe the bug** I fiddled with the target heat temperature and found out that the optimisation plan did not pick up the most cost effective hour to heat. Here is...

**Describe the bug** Currently, the operating_hours_of_each_deferrable_load parameter in EMHASS only accepts scheduling inputs in full hours. For high-power devices, such as an EV charger, the inability to specify fractional hours...

Possibility to get connected batteries information from main battery?

8

Hi! First thank you for what you have done, it's a really useful piece of software. At the moment i have four batteries and they are connected to one Lilygo...

[Feature Request] Enhance `def_current_state` to accept real power (W) and force this value for the first timestep

3

### Is your feature request related to a problem? Please describe. Yes. The optimizer's main load forecast is based on `sensor_power_load_no_var_loads`. When a user manually starts a deferrable load (like...

[Feature Request] Use Actual SOC as Starting Point in Optimization

12

**Feature Request: Use Actual SOC as Starting Point in Optimization** ------------------------------------------------------------------------ ### **Problem** Currently, EMHASS uses the configured battery\_minimum\_state\_of\_charge and battery\_maximum\_state\_of\_chargevalues both as **bounds** and as **hard limits for the...