Martin Pittermann

I have the same issue you describe in your second comment, but luckily read your issue before trying again to upgrade my bootloader. My bootloader still seems intact, but trying...

Ok, so I made it work under linux once: I modified TinyProg.cmd to re-issue the command if the read timeouts before receiving the appropriate number of bytes. Also TinyProg.wait_while_busy needs...

For anyone stumbling over this issue in the future: uninstall modemmanager from your system. The udev rules alone did not work for me, now it works flawlessly on linux too!...

Hi, right now I'm too short on time to add translations. I don't think this will make it onto my todo list any time soon. That said, the source is...

Hi Michael, OpenCNCPilot intentionally doesn't probe Z=0 at the start of a run so you can set the zero position at an arbitrary point. (XY zero might get milled away...

first attempt at a double sided PCB, 0.4mm traces, SOT-23 and 1206:  

My latest project, a three-phase power monitor built around the ATM90E36A:     As of yesterday it is mounted in a DIN rail case inside our main fuse...

It's a bit rough around the edges but damn, this is the most beautiful milled PCB that I've seen yet! Why worry about FR-4 dust? Just drip some alcohol on...

Hi @A-J-Bauer, thanks, your PCB looks great! I absolute love your icon and I actually was about to ask for permission to use it :) I'll definitely add it before...

   This is the PCB for my latest project, an energy monitor to plug between an outlet and a device. For clearing out the large copper areas, I...