markusC64

What's the problem? I can decode the attached dmf image by fluxengine read ibm -s bda-dmf.scp -o foo.img [dmf.7z.zip](https://github.com/davidgiven/fluxengine/files/8773013/dmf.7z.zip)

IBM? https://en.wikipedia.org/wiki/Distribution_Media_Format clains that it has been used by Microsoft. Perhaps you mix DMF up with XDF which IBM has been using.

As the author of g64conv, I'll give an educated guess: The .scp file does not contain at least 3 rotations. .scp files with 2 rotations or less are creating the...

In case you're sucessfull, please let us know the fluxengine command needed. I haven't been suvessfull with fluxengine storing multiple revolutions inside the .scp file.

Ad 4: I was told that this is impossible. Menu is done via DMA in Ultimax-Mode. Ad 3: I do not think that is possible - after reading the MMU...

Ad 4: https://github.com/GideonZ/1541ultimate/issues/31#issuecomment-435684797 And yes, SuperCPU did this trick. But it needed an extra wire from the module to the inside of the C128. So it did some cheating. Ad...

I think extending 1581 support (with fastloaders) might result in burst mode support, too...

P64 is rarely used. Mainly because there was no software to create it from Fluxengine, Greaseweazle, Kryoflux, SuperCard Pro. Yesterday I released g64conv 3.0 that creates P64 from Kryoflux Dumps....

The problem is sth else. There is the "TRK" Header. Followed (but not directly followed) by Rotation Infos (Track Size, Offset of Track Data and Index Position). Some rotations point...

I might add: My 1st attempt was to use the 1st rotation, append the 2nd rotation, ... and parse the resulting flux stream... Even if the point of switching rotations...