markkundinger

That's unfortunate. In my case it's a 70 minute plot and a 15 minute copy. That's a signicant slowdown on a percentage basis and I'd rather just run madmax naked....

i'm noticing related but different behavior. if I have MaxActivePlotPerPhase1 set to 2 and have "DelaysBetweenPlot" set to something big like 2 hours, then I will have a case where...

It seems to me like the combination of a phase 1 check and a delay/stagger are working in a different order than I would expect. And it's more noticeable with...

> > > Maybe if I explain the logic then this will help (or uncover a bug) > > 1. if no temp / target directories set it will skip...

okay the new beta seems to work on the 1600AF? (which remember is basically a zen+ 2600).    the only thing is that when I do an overclock...

okay here is the baseline info from my cheap motile laptop with a 3500U. from the 2.0 debug version and from the SMU tool. [SMUDebug_26517449.9029509.json.zip](https://github.com/irusanov/ZenStates/files/4713543/SMUDebug_26517449.9029509.json.zip)

my initial tests with the 3500U showed the following: * the display of the voltage for "manual overclock" seems to actually be the voltage for the lowest P2 state *...

I have suggestions and opinions for the node dashboard display! (yes, I realize what opinions are worth). 1) Change description to "Disk Space Reports by Satellites This Month" 1b) after...