markanini

Did a quick test with dezo2's build two replies before mine. Moving and jumping slows down when fps goes below 144Hz. No issues other than that.

Open the gradient test from here https://www.eizo.be/monitor-test/ For me temporal is the only effective option.

The lagom test has issues pay more attention to the verification reports max and avg delta-E. The check list for near black issue includes: What's the measurement device? What's the...

> With Calibrate to Gamma 2.2 relative 100 % black outpout offset it still crushes black. With 0% offset its also not right. It's not clear how it was determined...

Not enough info, you need to upload a verification report with max neutral patches. An issue I noticed is that your monitor has a DCI-P3 98% spec. The suitable correction...

Thanks for the report. All I see is a discontinuity around 4%. Maybe a rounding error? I can't say If it explains the issue in the lagom test. Does the...

Curious if custom testcharts improve verification scores in this application. Before using novideo_rgb on my consumer grade WLED display I got the best scores with the default 175 patch set,...

Depending on the profile with the test version average Delta E dropped .1 - .05. I made the profiles last night. Independently I compared the average delta E for the...

> > Same issue after upgrading to 22H2, definitly Microsoft updated DWM. Hopefully this will be fixed in the end, just be patient. > > Microsoft is finally getting around...

> I'm talking about sRGB vs Gamma 2.2 display assumed EOTF holy wars. It's not that contentious. Calibration tools use a pure 2.2 gamma with sRGB/Rec.709 primaries as the default...