mark4o
mark4o
There is no particular reason for the file to become damaged.
Thanks for the report. This has been fixed by 8101b33e6c59b51b22aeeeaf39045e34a402b01f and 63855aff731dcf58875c159dc2fa7463a444d617.
It looks like your libopus.so was built with CPU features enabled that are not available on your device. Check your libopus.so build and remove any -m options enabling such CPU...
The code only reads up to frame_size samples per channel into the buffer. If less than the requested amount could be read, stop is set to 1. The proposed change...
Thanks. I'm not sure that these options make sense for opusenc. For example FEC is for handling packet loss, which cannot happen in an Ogg container since it is stream...
@vadimkantorov The encoder bandwidth does not affect the decoding sample rate. Using the opusdec program you can decode at any sample rate using the option --rate n.
The original sample rate in the header is already the default decoding sample rate in opusdec.
The Windows artifacts are now working again and can be downloaded from Appveyor. As for your link command, the libraries need to be listed at the end of the link...
Currently the audio playback feature is enabled whenever the associated header files are available. I agree that there should be a configure option to disable this, in order to create...
Packet sizes larger than 60 ms can be useful with RTP or other scenarios where each Opus packet is sent as a network packet, because network packets can include a...