mariustt

@make-all good news! I'm really looking forward to the PR and then I can test it with my devices. I have quite a few BLE devices - 23. Only if...

@grayyang Thank you for your very detailed reply! Considering that the logic itself has remained the same: one device -> one team, there might not be much change in the...

> @mariustt offtop: Could you please let me know which smart tack lights do you have? I have similar ones, but they work through their own wireless protocol 2.4 GHz...

@almirus I have not tried the nRF Connect app. To tell you the truth, I have never heard of it. However, I reach all devices directly via BLE (without a...

> > However, this still means, depending on the current implementation of `tinytuya` library we are using, it is not possible to treat multiple subdevices as one single device since...

@zalatnaicsongor if you decide to explore this issue further and perhaps even create a separate lib, please share. I think this should open up full support for all datapoints via...

I have exactly the same problem. Additionally, I received the latest OTA version of GL-C-006P (not the mini) from the supplier - [GL-C-006P_V20451203_KEY_20240227.zip](https://github.com/Koenkk/zigbee-OTA/files/15125580/GL-C-006P_V20451203_KEY_20240227.zip)

Thank you for the information, @marce14-git ! I have tried your OTA, the update was successful, but the lights still do not turn on/off. Didn't you do an additional factory...

@marce14-git the problem was solved with your OTA - thank you! I updated my PR by changing my OTA to yours (https://github.com/Koenkk/zigbee-OTA/pull/486).

@Koenkk I think we can mark this one as closed because it is resolved with this PR - https://github.com/Koenkk/zigbee-OTA/pull/486