marekorok

Hi there, I'm also experimenting with arc and experiencing slowing and have some observation: For me it looks like only G2 is slowing down, while G3 is printing normal-fast speed....

> @marekorok, do you have a link to your marlin source? If it's 2.0, I saw a recent issue discussing this exact problem, along with a commit to fix it....

ok, did few tests. Changing MM_PER_ARC_SEGMENT only to 0 was a disaster, SKR board become overloaded, unresponsive and slowed down completely, but still moving, verrrry slowly. Also changed to 2,...

> You mat want to adjust min_arc_segments too. Not sure what your current value us. Something between 16 and 32 should create good looking small arcs. Im using 20 in...

> Thank you. > > Edge version now runs, but I get wrong data on SUN-12K-SG04LP3-EU (LV inverter). > > Could this be related to the merging of LV and...

> > Can confirm that #269 fixed the issue. Thanks @rixxxx > > CC @raulliive @marekorok ok, I was trying to test it and updated the file sensors_options.py within the...

> @marekorok If you want to go the hard way then you should patch the /usr/local/lib/python3.11/site-packages/ha_addon_sunsynk_multi/sensor_options.py and then restart the container. Thank you! tested and works on my side, I...

> 340000 well, this tip actually worked for me, almost... I was struggling for several hours, always had success with default 921600 but device never worked (no display, no communication),...

well, I'm using standard [mosquitto mqtt broker](https://mosquitto.org/) installed on my home assistant environment and I don't want to use anything else. Then it is using standard ports ([established by IBM](https://www.ibm.com/docs/en/mapms/1_cloud?topic=reference-mqtt-messaging),...

don't bother with HA for the moment, leave it for later, but shortly: the integration is done through specific autodiscovery mqtt topics: https://www.home-assistant.io/integrations/mqtt/ Assuming there is standard MQTT client implementation...