marcusbirkin
marcusbirkin
How about the main FPS counter shows SC 0x00 (DMX), with a hover over tooltip showing other SC, and a combined total? So as not to have too many specialist...
Almost all the windows need the options preserving....
@EVeik Can you confirm if this is resolved in v2.1?
Discovered universes as in the extension to sACN that allows each source to publish a universe list (as implemented in the discovered universes tab) or scanning the network for all...
Topic updated after discussion with OP about use case. A large number of universes need to be snapshotted, the range will be typed input. Example of input format: 1,2,3,4,5-10
It appears that the effect engine output is actually unable to maintain the rates currently prescribed. E.g. Setting 25Hz results in about 20-21Hz output 50Hz results in 32Hz
Very likely that incorrect mainaining of rates is resolved by #196
Could you attach (or email if needs be - I expect you know my work address!) a wireshark dump of the malformed sACN, I can then play this back and...
It doesn't crash either my Windows or Linux installs, but I do see that the FPS at one point is over 250 Hz! I expect the issue is some form...
"Fade Rate" under Fade Range of a transmit window allows you to alter the FPS. Avaliable options are 0.5,1,2,5,10,25,50,75,100,500Hz In practice the 500Hz option will actually be limited by the...