marco
marco
Thank you for the quick response. It seems so - this is my output: [D] core 0 thermal status: thermal limit status = 0 [D] core 0 thermal status: thermal...
reconnecting the power cord does not have an effect for me. When it's connected it's limited. When I disconnect the AC the settings of the battery section are working fine....
I just flashed the older BIOS 1.5.1 again (had 1.6.3 before) and the issue persists. It's not going beyond 10W on AC (what s-tui tells me)
@erpalma Thanks for the hint. I'm using v0.3 for now and it works fine. EDIT: not quite. Today I only have max power of 18W and it clocks under stress...
Battery / AC is detected correctly when I unplug and plug the power cord.
I for myself did not have TLP installed. I used powertop --autotune on boot.
> Providing I boot with either "Balanced" or "Performance" set, this issue is resolved (for me, keen to see if for @hyphone too). Sadly I'm planning to sell the machine...
> Looking at all the forks of this repo this one seems updated most recently: https://github.com/Natizyskunk/vscode-sftp/ > Anyone tried this yet? ~~does not work for me~~ ssh-streams module has to...
> Afaik GNOME Shell extensions are unsupported on ostree by design. Therefore no GNOME shell extension is able to run on Silverblue. Please prove me wrong if that is not...
Because /etc/ is still writable the udev rules could be moved to there and the executable could rely within the path of the extension itself instead to get moved to...