Marco Brianza

Info: ready made active adapter board

16

I have just tested this ready made active adapter board on a Pi3: http://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/ It works. I'm using it with 18 64x32 P3 panels  ![2017-10-07 10...

multiple apps listening on the same UDP port

7

Hello, thank you for this great library. I have the case where 2 processing applications running on the same computer need to receive messages on the same UDP port. In...

oscMessage.address() returns an extra trailing "/"

1

in oscEvent I get "/192.168.1.133" instead of "192.168.1.133" also OscMessage.netAddress() returns a variable that is not working as destination endpoint.

Lolin D1 mini Pro 2.0 - what is LDO_EN ?

3

What is the jumper labeled LDO_EN is supposed to do on this board https://wiki.wemos.cc/products:d1:d1_mini_pro ?

Just posting here some fixes that I needed to make to build the project in November 2023 with the current core in esp32_pcap_serial.ino change this include #include "esp_private/wifi.h" //#include "esp_wifi_internal.h"...

Please add name support to the MQTT broker fields.

15

**ESPixelStick Firmware Version** 4.0-ci8282977806 **Hardware Version** Dig-Octa **Binary release or compiled yourself?** CI release **Describe the bug** The board is configured with this config [ESPixelStick-5C695A1B5AE0-static-ip.json](https://github.com/forkineye/ESPixelStick/files/14613373/ESPixelStick-5C695A1B5AE0-static-ip.json) The configuration has a static...

[WEB Installer] Lolin S3 mini loads but does't boot wled

34

Hello, just tested the web installer with release 0.14.2 on Lolin s3 mini The installer does its thing but the board does not boot wled afterwards. The serial loops with...

[WEB installer] support for Lolin s2 mini

12

I cannot flash wled to a wemos S2 mini with the web installer (esp8266 and esp32 are ok) I have also tried the alternative bootloader without success. I have been...

compatibility with new AVR cores

3

Hello, I am having issues with this library, like it produces few random numbers than it stops. It used to work a couple of years ago. Can it be that...

[WLED-Webinstaller] failed to download manifest

1

 for some ESP8266 releases at high frequency the above error message is displayed and cannot be installed