maps2002

Hi, I also wanted to use@martin-ger great work but with a static IP on the STA. I think the original code is not working because when a static ip is...

Hi, I also have these same "connection" errors. I don't have pulseaudio running. Tried it with --alsa, but I am always getting these messages. The result that I have right...

Hi @ehough , You are right. I was trying to get the audio thru HDMI, but if I change to the Audio (3,5mm) out, I can get sound on the...

Thanks. Didn't work at the first try, with what I assume to be the HDMI sound card. `aplay -l` `**** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA...

Thanks for the help. Tried a handful of variations to choose the sound card / device, but without success. Will google/read additional info to better understand how ALSA works, and...

Hi there. I have the same heat pump model, and the results are the same. I also have a USB to TTL adapter that I can try to use with...

Thanks for the feedback. Tried with service checker 4, but had the same result as @joseal . So it seems that until the "right" service check is found, it won't...

Hi @joseal and @raomin, tried with the S-Protocol. Definitely works! With PROTOCOL_S_ROTEX definition file (not with PROTOCOL_S), the "DHW tank temp.(C)" and "Refrig. Temp. liquid side(C)" seems to be read...

> (Remind me, does the device have two or three AA batteries? Mine's so sealed up tight with PTFE tape that I don't want to re-open it to check.) Hi...