magnificu

I have the same issue with the noise/vibrations running Marlin 2.0.9.2 on SKR2.0 board with TMC5160 drivers and Netma17 46Ncm 09deg 2A steppers for X & Y axis in a...

Thank you for the feedback. As a quick and dirty solution I tried to run both dhcp servers concurently: pihole dhcp only for eth0 and isc-dhcp-server only for the wlan0,...

update: I did some progress on this topic. The LAN (Pihole + dhcp) works as expected. I can connect on the hotspot without internet connection or access to the LAN...

@Joulinar: I did a fresh installation and followed your instructions. I had to edit nano /etc/dnsmasq.d/02-pihole-dhcp.conf and specify the interface, otherwise pihole and dhcp will not work on the local...

After a longer testing it seems that pihole send the following warning: DNSMASQ_WARN Ignoring duplicate dhcp-option 3 According to pihole documentation this means: DHCP options specified more than once are...

@MichaIng I did the update as you proposed and pihole does not send any warning anymore. ``` dhcp-range=eth0,192.168.1.2,192.168.1.254,255.255.255.0,24h dhcp-option=eth0,option:router,192.168.1.1 dhcp-leasefile=/etc/pihole/dhcp.leases ``` Just wondering how can be specified that dhcp-leasefile is...

> Indeed, according to the manpage the `dhcp-leasefile` option does not support tags. But AFAIK the way the info is stored, it is not needed, i.e. a single lease file...

systemctl status smartctl-hdparm ○ smartctl-hdparm.service - Tune hard disk parameters Loaded: loaded (/etc/systemd/system/smartctl-hdparm.service; enabled; preset: enabled) Active: inactive (dead) since Sun 2025-01-12 10:05:02 CET; 1 day 1h ago Main PID:...

run-parts /etc/smartmontools/hdparm.d/ smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-29-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF ENABLE/DISABLE COMMANDS SECTION === Write cache disabled Standby timer set...

I can confirm that both drives (sda and sdb) are not going in Standby