madworm
madworm
I've verified that the email I used to create the account works, however I don't get any activation emails. Tried the resend option, nothing happens.
http://www.kicadcloud.com/pcbModule/4351 The center pad currently touches all other ones.
I recently uploaded a footprint that contains some routing information. It's a breakaway tab that makes self-panelizing a bit less tedious. I used the "Eco1.User" layer (#26) for this. Unfortunately...
As came up on the mailing list, it should be helpful to have a mandatory minimum of information supplied for the parts. Manufacturer, model, description, alternative (e.g. mouser / digikey...
When running a slideshow with normal images and pdf files, images / pages are advanced every N seconds, as defined by "--slideshow-interval=N" When viewing animated gifs or movies, this timing...
Evaluate if a) multi-point (e.g. 10 or 20) calibration is feasible & accurate enough b) non-linear fit on calibration data is OK (might need float variables - slow) What about...
### Description I have several smb shares connected in explorer (pushed & named via group policy settings). These shares do show in in Files, but neither have a drive letter...