jason pilarski

Thanks the sweep sample helped but I specifically want to apply it to ServoGroups using ServoGroupMove.moving(). I will dig around more but when I do I came across this quote...

Those are the pins I used but unfortunately the touchscreen is unresponsive. I was really excited to use it too. Do you have any other suggestions or is this something...

When I run from machine import I2C i2c= I2C(I2C.I2C0, freq=200000, scl=30, sda=31) devices = i2c.scan() print(devices) I do get output: [38, 72] However it continues to only output 0 0...

Here is what I discovered. I also tried it using the arduino ide and I get the same result. The i2c address scans, the lcd works, however I get no...

I appreciate your suggestions. Unfortunately it still doesn't respond to touch. I am going to get a replacement board and I look forward to using it. On Wed, Jun 19,...

That link is dead so please resend and I'll try it out. I got a replacement GO and the touchscreen works. I then tried to swap the screens and the...

Thanks for the info. I am still unclear on how to change my wifi settings. Do I need to upload the firmware each time I plan to use this device...

The tbd-bba sounds incredible I can’t wait to use it. I’m particularly excited by program change control. You can use the algorithms as modes in a similar way to how...