Linar Yusupov

FYI: you may consider to try this: https://www.virtualhere.com/ (USB-over-TCP, port 7575) as a tool for: - to remotely flash firmware binaries into a target board ; - to remotely monitor...

@XCNav XCSoar had inherited "_USB for Android_" support from LK8000 last year. Thus, just like the LK8000 does, the XCSoar uses https://github.com/mik3y/usb-serial-for-android component to operate with USB-Serial devices. The library...

Inspect if your issue report duplicates this one: https://github.com/mik3y/usb-serial-for-android/issues/428

> After communicating with Bruno from LK8000 he changed the way the driver identifies the 232. If you would supply commit ID of the LK8000 patch - IMHO, it will...

``` $ lsusb -v -d 10c4:ea60 Bus 001 Device 053: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB...

> We have tried the latest change with an android build based on the latest changeset (2), but still we see only one port, ttyS1, the console port of a...

Read this: https://github.com/LilyGO/TTGO-T-Beam/issues/55#issuecomment-1216238743

It was reported that certain T-Beam batches could have been manufactured with wrong R38 value. 

This GitHub project is not applicable for the T-Solar, because: - T-Solar uses ASR650**5** (STM8 MCU architecture) - CubeCell uses ASR650**1/2** (PSoC4+ MCU architecture) they are completely different.

@me-no-dev both 'stable' and 'dev' JSON files are truncated: - "2.0.15" is the only listed in the 'stable' one: https://espressif.github.io/arduino-esp32/package_esp32_index.json - "3.0.0-rc1" is the only listed in the 'dev' file:...