lvs1974
lvs1974
@tctien342, thank you for the information! It would be hard to guess! So, now we have another fix, but it requires sleep/wake trick. The fix is quite simple: in AppleHDAController...
> @lvs1974 did you try to patch AppleHDAController using OpenCore yet? Yes, sure. It works.
@tctien342, I saw you mentioned in experimental branch update a special build AppleALC supporting alc-device-id and alc-vendor-id for spoof HDMI audio. But you can use a standard AppleALC and OpenCore...
@tctien342, yes, sure! In Clover also!
@tctien342: I was wrong. I tested it many times, and unfortunately binary patches in OpenCore (and I suppose in clover) do not work. Probably this issue is related to AppleALC,...
@tctien342, I would prefer do not use FakePCIID. If you use build script anyway, you can clone AppleALC from acidanthera, replace strings in Controllers.plist (for the second patch you can...
@tctien342: I did not check yet, will do it later. But: I don't use patch for AppleHDAController in OpenCore any more, since it is unstable. Instead I patch Resources/Controllers.plist in...
@tctien342: so, it really gives a better battery management in 15,2? Or disabling of thunderbolt completely is quite enough?
@tctien342: could you specify here what exactly has to be switched off for thunderbolt, please? There are so many settings for thunderbolt... And will USB-type C 10 Gb port work...
In Mojave battery management is a bit better OOB. And everything is ok with GPU. I am also worried about battery drain during sleep: 7-8% per 12 hours...