Дубовик Максим
Дубовик Максим
@Ehot93, реализовал в PR #32. У меня на УНФ работает.
> is @lufton even looking at these? seems many are closing due to inactivity... Sorry, guys, I'm not maintaining this component right now. I'm from Ukraine and left all of...
@zabil @NivedhaSenthil any update on this?
@tistructor I kinda made the same for 10.2kW version. Are we talking about Wi-Fi Plug Pro-05? The only problem I found is it reboots every 15-30 seconds. I measured voltage...
Wow, @tistructor thanks, I'll try your solution! How did you manage to reverse-engineer that?
I've fixed mine connecting input of additional 3.3V linear voltage regulator to output of 5V regulator and it's output to 3.3V rail.
Do you think this will also work? ``` output: - platform: esp8266_pwm id: keep_alive_output pin: GPIO13 frequency: 2Hz ``` upd: actually it will require some additional component like light and...
I think this should work: ``` interval: - interval: 250ms then: - output.toggle: keep_alive_output output: - platform: gpio id: keep_alive_output pin: GPIO13 ```
output should work the same way as switch, but configuration will be shorter and I believe firmware is gonna be smaller as switch implementation is much more complicated than output.
@tistructor according to your code it looks like it pulses not 2Hz, but 0.5Hz (full cycle in 2 seconds). So what is the correct value?