lorenzspenger
lorenzspenger
``` [esp32.preferences:143]: Saving 7 preferences to flash: 2 cached, 5 written, 0 failed [W][component:204]: Component preferences took a long time for an operation (0.06 s). [component:205]: Components should block for...
As far as I'm aware Yeelight uses ESP32s with only 2MB of flash. This issue can be circumvented when using a correct partition table. ESPHome won't flash since the fw...
I spotted a problem on my blinds that there on different positions when set to the same, depending from which state they started to move to the desired position. It's...
I don't think that can be represented in HomeKit tbh. But it could be used to determine the actual position of the shutter when set to a specific open state...
And why not make it configurable as an advanced option, so you can set the lower 10% for just changing the state of slats e.g. Just an idea. :)
Just want to chime in that I see the exact same issue as @9shearer. > 1. Sensor works normally for a few hours > 2. At some point, it stops...
I would love to see the feature as well.