linxcow

suppressing some serial output from the scan whitelist example

3

How can i suppress following output to my serial monitor ? 20:50:32.829 -> Service Data: 20:50:32.829 -> UUID: 0xfe2c, Data: I just want to see the advertised lines.: 20:50:25.525 ->...

Modulenotfound error after install in Raspberry Pi OS Lite kernel 5.15

1

I used the method described in the online help to install using pip3 I set the wifi card in monitor mode ( checked using iw wlan info) after launching i...

M5 core ink display show dimmer content

2

I've written an app on the coreink using M5GFX that displays data on the screen. Sometimes if i press te powerbutton or wakeup from sleep the black pixels go briefly...

Black display when using setcursor() even when changing fontsizes from 1 to 7

3

### Describe the bug Using following code after installing m5stickcplus 0.1.0 i get always black display. I also note in my other projects that using setCursor(0, 0, x) to change...

I cant find the files for "Belgian" keyboards , are there other files compatible for Belgium Layout?

I was trying out this library with my ESP8266 board but found that the accel.available() in the loop() never resulted in "True".,thus not printing the data. What worked for me...

Weather Data renewed interval?

3

I'm using the api for a small one liner display , but i noticed the data stays the same for several hours. What interval is the current weatherdata renewed?

oled 1.3 ssh1106 odd behaviour

1

I tried the library with a basic example #include void setup() { oled.begin(0x3C); // SH1106 I2C address oled.clear(); oled.print(F("Hello SH1106")); oled.display(); } I also tried different init strings like this...

Does this tool adjust with new releases for "current cracking speed" available to calculate time to crack?

2

If not present , are there any plans to do so as i see this as an import security gain to adjust the password complexity advice for people using this...