driver
driver copied to clipboard
DEPRECATED: Updated Linux drivers for the ATWILC1000/ATWILC3000 products are located at https://github.com/linux4microchip/linux/tree/master/drivers/net/wireless/microchip/wilc1000. To simplify develo...
Hi everybody, I have a problem with the ATWILC3000 development shield and my beaglebone black. I use the SDIO Interface to connect the beaglebone and the WILC3000 via Jumpe wires...
Hello! I'm working with a WILC3000 module for OpenWrt. I compiled the wilc-sdio.ko for the OpenWrt Linux version 4.14.176 and the driver initialized successfully when using insmod. But when I...
I am integrating wilc3000 with BBB using Kernel 5.10 ([Debian: Getting Started with the BeagleBone Black]. This version Pin numbers are different from 4.19 kernel version. In 5.10 kernel SPI...
The following kernel panic was observed while shutting down Linux. This kernel panic occurs intermittently. Running v15.5 of the WILC1000 firmware/kernel driver. [ 190.921835] Unable to handle kernel NULL pointer...
Hello, I am facing an issue with the WILC3000 firmware 15.5 directly from the kernel 5.10.50. I have my SAMA5d27-som1 and my WILC3000 fully working with the version (linux4sam-6.0 WILC...
hello, wilc1000, wilc1000_sdio drivers or ATWILC1000 SD board do not properly start and work on my SAMA5D3_XPLAINED board - built kernel for SAMA5D3_XPLAINED : Linux version 5.10.87 : this contains...
Hello, We have a custom board based on iMX6 with Wilc3000 link by SPI. Kernel is 5.4 Our devicetree is : &ecspi3 { pinctrl-names = "default"; pinctrl-0 = ; status...
Hardware : wilc1000 on SDIO Os: Linux version 5.4.24 Hi there, im trying to set up an P2P go with hidden ssid, unfortunately neither "ignore_broadcast_ssid=1" and "scan_ssid=1" has an effect...
Hi, I'm testing some basic Bluetooth functionality using the WILC3000 on our custom board. I'm using the HCI command line tools to test basic connectivity between the WILC3000 and other...
Hello, I have found in #85 that @ajaykathat said: > Please note WILC3000 doesn't support BT classic and only BLE mode is supported. I don't understand: in the Datasheet, it...