Pete Lewis

Note, this is a slightly strange use case. I am using both inner layers for GND polygons, and they do not have any traces on them. They are simply being...

Fiducial packages need tKeepout (aka courtyards) of at least 10 mils clearance

4

AOI has a much easier time finding fiducials that have a proper "ring" of clearance around them. This also requires that we start running the DRC with the tKeepout layer...

-used default kicad package (SOT-583-8)

Adding SPI programming on a Raspberry Pi (from the IDE)

9

I've been working on a [stand-alone AVR programming solution](https://learn.sparkfun.com/tutorials/raspberry-pi-stand-alone-programmer) for SparkFun over the past couple years. Currently, we use Python (watching a GPIO) to engage a bash file that calls...

-Updated to new red LED and 4.7K bias resistor -Note, this PCB is shared with a 3.3V and 5V version of the pro micro -added a table to the schematic...