lekrom

Multiple images on same sheet

2

Hi @sleemanj I was wondering, is there a way to have multiple copies of the same images on a particular page, in other words to have 2 x copies of...

iSpindel temp display

4

Hi Vito. Still loving my BPL a lot! I have a question / suggestion. In the iSpindel section on the main (graph) page, all the iSpindel values are displayed except...

Network issue

5

I am unable to connect BM to my wifi network. After connecting, the sys reboots and displays the last 5 digits of its IP adress. (Nothing else on the LCD)....

Hi @vitotai Sorry, I had a slight oversight. I did not notice that the brewlog only gets created at the dough in stage. As a result, my solution to issue#91...

PID autotune does not work correctly

3

The PID autotune algorithm behaves erattically. The autotune cycle completes prematurely without cycling through the setpoint as it should. The PID params derived are nonsensical and unrepeatable. Not working at...

Another Sparge error

3

Hi @vitotai I just upgraded to 0.5. While doing a test run, I noticed an issue with the sparge heating control: After reaching temp for mash step 1, the sparge...

issue with PID parameter scaling

1

Hi Vito. Great work on the latest BM. I have upgraded my system from the old arduino BM to the latest BMex. There is however something i would like to...

Sensor resolution setting

4

Hi Vito, I noticed that the sensor resolution setting is not kept in Persistent Storage and thus the setting is lost on power down. Is there a reason for this?...

Stopping PWM

6

Hi @maxint-rd, Nice lib. Well done. I do have a suggestion. I think it would be useful to provide a function to disable the pwm once started since setting duty...