Larry

I tested creating an IMG (.RAW) file from the mykpiiboot1.scp file with the following: $ ./fluxengine read kayii_525 -s mykpiiboot1.scp -o kaypro2tst.img > kaypro2tst.log Listing of kaypro2tst.log: SCP tracks 0-39,...

David, Yes, I booted my Kaypro II and used the program named "CPY" to Format a 204.8K SS/DD Floppy, Then, used the "EXIT" menu selection to reboot the Original floppy....

David, I know you won't believe this, but I tried writing the mykpiiboot.raw from the mykpiiboot.zip to a couple floppy's and they did not boot on my Kaypro. I used...

David, Glad to try it again. Here is what I am seeing. at ~/fluxengine-kaypro2/ I type in....... $ make clean $ make The previous SCP file I read with Supercard...

David, Yes, the 360K Mitsubishi 4851 Floppy drive is 300 RPM ~200ms. The 22 Disk definition for the Kaypro is: BEGIN KAY1 Kaypro II/2 - SSDD 48 tpi 5.25" -...

David, I stil can't get a floppy written. The SCP file I read with Supercard Pro was kpiibootscp.scp I know it is a good file as I can write it...

David, It's been just about a week since I sent you the error message I'm getting for the Kaypro II branch when trying to write a disk with an image....

David, Thanks for the update. I'll give it a try. Larry On Tue, Jul 27, 2021 at 12:40 PM David Given ***@***.***> wrote: > Sorry, this got dropped on the...

David, I just re-read your answer and noticed you said 360 PM. My floppy is a 5.25" 360K Mitsubishi drive spinning at 300 RPM. And 202ms for 300 RPM. I...

David, I set the Mitsubishi Drive for exactly 300 RPM. It still is giving me an error. Here are my test results. $ ./fluxengine rpm -s drive:1 Rotational period is...